Network Camera (Wired LAN) Settings

Access Level Settings

When operating the network camera, you need to select an access level to either limit operations to only the monitoring of live images or to allow menu settings to be changed as well.

The access level setting depends on the “Username” and “Password” that are typed in after the wired LAN settings have been made. (p. 15)

The default access level is “Administrator” (ID3, 3333) which allows all operations to be carried out. Change the username and password to the desired access level while referring to the table below.

Table 1

Username/password

Access level

For Administrator access level

All operations and settings can be carried out.

Username: ID3

 

Password: 3333

 

For Operator access level

Username: ID2

Password: 2222

Only the following buttons can be operated.

For User access level

Username: ID1

Password: 1111

Only the following buttons can be operated.

The transmission setting menu in the live image screen is disabled.

In order to make it easier to refer to this Instruction Manual when carrying out the various camera operations, the usernames (_ID1_, _ID2_ and/or _ID3_) are indicated in the top-right corner of the page.

For example, if _ID3_ appears, then the operation is only available at the Administrator level.

English

– 23 –

Page 24
Image 24
Sanyo VCC-WB4000P instruction manual Access Level Settings, For Operator access level, For User access level