I N S TA L L AT I O N
4
Connect a coaxial cable between the ANTENNA OUT terminal on the cable box and the
Incomin
g Cable
Splitter |
| RF (A/B) |
| Cable Box | Switch |
|
|
5
Connect another cable between the other OUT terminal on the splitter and the
Incomin
g Cable
Splitter |
| RF (A/B) |
| Cable Box | Switch |
|
|
6
Connect the last coaxial cable between the OUT terminal on the RF (A/B) switch and the VHF/UHF terminal on the rear of the TV.
Incomin
g Cable
Splitter | RF (A/B) | TV Rear |
Cable Box | Switch |
|
After you’ve made this connection, set the A/B switch to the “A” position for normal viewing. Set the A/B switch to the “B” position to view scrambled channels. (When you set the A/B switch to “B”, you will need to tune your TV to the cable box’s output channel, which is usually channel 3 or 4.)
