I N S TA L L AT I O N

Connecting a VCR

These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on pages 10-13). Skip step 1 if you have not yet connected to an antenna or a cable system.

1

Unplug the cable or antenna from the back of the TV.

2

Connect the cable or antenna to the ANTENNA IN terminal on the back of the VCR.

VCR Rear Panel

Incoming

Cable or

Antenna

3

Connect a coaxial cable between the ANTENNA OUT terminal on the VCR and the antenna terminal on the TV.

VCR Rear Panel

TV Rear Panel

Coaxial Cable

A coaxial cable is usually included with a VCR. (If not, check your local electronics store).

4

Connect a set of audio cables between the AUDIO OUT jacks on the VCR and the AUDIO jacks on the TV.

VCR Rear Panel

TV Rear Panel

 

Audio Cable

5

Connect a video cable between the VIDEO OUT jack on the VCR and the VIDEO jack on the TV.

VCR Rear Panel

TV Rear Panel

Video Cable

Follow the instructions in “Viewing an External Signal Source” to view your VCR tape.

English - 14

Page 14
Image 14
Samsung TX-R2735G manual Connecting a VCR, Unplug the cable or antenna from the back of the TV