33
OPERATION
Labeling the Channels

Use this feature to assign an easy-to-remember label to any channel (i.e., “CBS”, “ESPN”,

“PBS2”, CNN1”, etc.) A label consists of four fields, where each field is a letter, a num-

ber, “*”, or a blank. When the INFO button is pressed, the channel label will appear

next to the channel number.

1
Press the CH or CH
button to tune to the channel
that will be labeled.
2
Press the MENU button to dis-
play the menu, then press the
▼button to select “Channel”.
Press the ENTER button.
3
Press the ▼button to select
“Labeling”.
Press the √√button to begin
labeling. The left-most field will
be highlighted.
(Each label has four fields.
See top paragraph.)
4
Press the ▲or ▼button to
select a letter, a number, “*”, or
a blank. (Pressing the ▲or ▼
button results in this sequence:
A,B,...Z,*, blank,0,1,...9).
▼

Note: You cannot select

“Labeling” in the A/V mode.

5
Press the √√button to switch to
the next field, which will be
highlighted. Select a second
letter or digit using the ▲and
▼ buttons, as above. Repeat
the process to select the last
two digits.
Press the MENUbutton to set the label and clear the menus from
the screen.