Samsung UA55HU9000RXUM, UA65HU9000RXSK manual Changing the 3D Mode, Picture 3D 3D Mode Try Now

Changing the 3D Mode

Picture > 3D > 3D Mode Try Now

111Launch 3D and then select 3D Mode under Picture > 3D.

222Choose from the 3D modes that appear on the screen. Supported 3D Mode may vary depending on the 3D content.

"" 3D Mode is automatically configured for most 3D content.

The following 3D Mode is available. However, mode availability may vary depending on the 3D content's format.

"" The supported resolutions vary for each mode. Refer to the "Supported Resolutions for each 3D Mode" section for more information.

●● (Off)

Deactivates 3D viewing.

●● (Normal)

Converts normal images to 3D images.

"" Some formats do not support this mode.

●● (L/R)

Splits a single image into left and right overlapping images to create the 3D effect.

●● (T/B)

Splits a single image into top and bottom overlapping images to create the 3D effect.

●● (Horizontal Line)

Switches between left and right images one horizontal line at a time.

●● (Vertical Line)

Switches between left and right images one vertical line at a time.

●● (Pixel)

Switches between left and right images one pixel at a time.

●● (Frame)

Switches between left and right images one frame at a time.

When the TV is connected to a computer:

"" The (Horizontal Line), (Vertical Line), and (Pixel) settings can only be selected when the computer's resolution is set to 1920x1080 ,or the computer is connected to the TV via an HDMI-DVI cable.

"" The (Frame) setting can only be selected when the computer's resolution is set to 1920x1080 and the frequency to 60Hz.