![](/images/backgrounds/346751/346751-025x1.png)
ĞĞWired - Manual
If you have a static IP address or the Automatic procedure does not work, you'll need to set the Network Settings values manually.
Follow Steps 1 and 2 in Wired - Automatic, and then follow these steps:
1.Select Network Status. The product searches for a network, and then displays the connection failed message.
2.On the bottom of the screen, select IP Settings, and then press the OK button. The IP Settings screen appears.
3.Select the IP Settings field, and then press the OK button.
4.Select Enter manually in the IP Settings field, and then press the OK button.
5.Select a parameter to enter (IP Address, for example), and then press the OK button.
Use the buttons on the remote control to enter the numbers for the parameter. Use
the buttons on the remote control to move from entry field to entry field within a parameter. When done with one parameter, press the OK button.
6. Press the or button to move to another |
parameter, and then enter the numbers for |
Wireless Network
You can set up a wireless network connection in four ways:
-- Wireless Automatic -- Wireless Manual -- WPS(PBC)
-- WPS PIN
When you configure the wireless network connection, any wireless network devices currently connected through the product or, if applicable, the product's current wired connection, will be disconnected.
ĞĞWireless - Automatic
1.In the Home screen, select Settings, and then press the OK button.
2.Select Network, and then press the OK button.
3.Select Network Settings, and then press the OK button.
4.Select Wireless in the Network Settings screen, and then press the OK button. The product searches for and then displays a list of the available networks.
Settings 04
that parameter following the instructions in |
Step 5. |
7. Repeat Steps 5 and 6 until you have filled in |
all parameters. |
NOTE
\\ You can get the Network parameters from your Internet provider.
8. When finished entering all the parameters, |
select OK, and then press the OK button. The |
Network Settings
Select your network type. |
|
Network type | Wireless |
Wireless network |
|
iptime23 |
|
|
|
iptime |
|
solugen_edu#2 |
|
Refresh WPS(PBC)
You can connect your Ultra HD
product verifies the network connection and |
then connects to the network. |
5.Select the desired network, and then press the OK button.
6.On the Security screen, enter your network's Security Code or Pass Phrase.
Enter letters by selecting a letter with an arrow button, and then pressing OK button.