Settings

NOTE

\\ To view the password as you enter it, use the arrow buttons to select Show Password on the right side, and then press OK button.

7.When finished, select Done and then press the OK button. The product verifies the network connection and then connects to the network.

8.When verification is complete, select OK, and then press the OK button.

NOTE

\\ You should be able to find the Security Code or Pass Phrase on one of the set up screens you used to set up your router or modem.

ĞĞWireless - Manual

If you have a static IP address or the Automatic procedure does not work, you'll need to set the Network Settings values manually.

1.Follow the directions in Wireless - Automatic through Step 5.

2.The product searches for a network, and then displays the connection failed message.

3.On the bottom of the screen, select IP Settings, and then press the OK button. The IP Settings screen appears.

4.Select the IP Settings field, and then press the OK button.

5.Select Enter manually in the IP Settings field, and then press the OK button.

6.Select a parameter to enter (IP Address, for example), and then press OK button.

Use the buttons on the remote control to enter the numbers for the parameter.

Use the buttons on the remote control to move from entry field to entry field within a parameter. When done with one parameter, press the OK button.

7.Press the or button to move to another parameter, and then enter the numbers for that parameter following the instructions in Step 6.

8.Repeat Steps 6 and 7 until you have filled in all parameters.

NOTE

\\ You can get the Network parameters from your Internet provider.

9.When finished, select OK, and then press the OK button. The Security Screen appears.

10.On the Security screen, enter your network's Security Code or Pass Phrase. Enter letters by

selecting a letter with the buttons, and then pressing the OK button.

11.When finished, select Done at the right of the screen, and then press the OK button.

The product verifies the network connection and then connects to the network.

12.After the product verifies the network, select OK, and then press the OK button.

ĞĞWPS(PBC)

1.In the Home screen, select Settings, and then press the OK button.

2.Select Network, and then press the OK button.

3.Select Network Settings, and then press the OK button.

4.Select Wireless in the Network Settings screen, and then press the OK button.
5. Press the

button on your remote, and then

press thebutton to select WPS(PBC).

6.Press the OK button on your remote. The "Press the PBC button on your wireless router within the next two minutes." message appears.

26 English