Samsung UE50F6100AWXZG 3D Active Glasses - SSG-5100GB for 40 models and above, Viewing guidelines

[UF6100-XNZF]BN68-04906E-08L04.indb 11

‹‹Turning the glasses off

‹‹Turning the glasses on

Battery Cover

Parts

Features

3D Active Glasses - SSG-5100GB (for 40" models and above)

Pairing steps

Samsung's SSG-5100GB 3D glasses enable you to view 3D images on your			1.	Turn on the TV, and then move the glasses within 19.5 inches of the TV.
3D TV. The Samsung 3D glasses communicate with Samsung 3D TVs via the			2.	Press the power button on the 3D glasses briefly. The 3D glasses will
2.4GHz RF band.
				power on and pairing will start.
✎✎The Samsung 3D glasses are only compatible with Samsung D, E, and
			3.	The message “3D glasses are connected to TV.” will be displayed on the
F series 3D TV's that were released in 2011, 2012, and 2013. These 3D
				TV screen when the pairing is successfully completed.
glasses cannot be connected to other Bluetooth devices.
				✎✎If pairing fails, the 3D glasses will power off.
				✎✎If the first	attempt to	pair fails,	power the	TV off and on again and
LED Indicator & Power Button				perform step 2.
				✎✎How to pair again: Press the power button on the 3D glasses for
				more than 1 second.
			<Pairing is needed again in the following situations:>
			• If the 3D glasses do not function, even when the power button is pressed,
Liquid crystal shutter				especially on the 3D TV after a repair.
✎✎For details on how to attach the glasses' temples and how to pair			• If you want to play 3D content on another Samsung 3D TV model that
				belongs to the D, E, or F series released in 2011 through 2013. You must
				pair the glasses with the other TV.
the glasses with the TV, refer to the separate 3D glasses manual.
Pairing 3D Active Glasses			Replacing the Battery
✎✎What is Pairing? Pairing is the process of connecting 3D glasses and a			If the red LED blinks every two seconds continually, replace the battery with a
			new one.
3D TV so that the two devices can exchange data.
✎✎Ensure your Samsung TV and 3D glasses are no farther than 19.5 in (50
cm) apart from each other while pairing is in progress.			Pull the battery cover Open the battery Remove the				Replace the
	‹‹Operating range							Push the battery	Close the battery
				downward	cover	battery	battery	cover downward	cover
	Recommended pairing distance		✎✎Insert the "+" side of the battery into the side marked with "+" in the
				battery compartment.
	50cm		✎✎To check the remaining battery capacity, refer to the pairing section in this
	2~6m			manual.
Press the power button briefly. The green			Viewing guidelines
LED is turned on for 3 seconds. (Make
sure that 3D is activated on the TV before
using the 3D glasses.)	Recommended viewing distance		• When viewing a 3D video under a fluorescent lamp (50 Hz – 60 Hz) or
Press the power button briefly. The red				3-wavelength lamp, you may notice a small amount of screen flickering.
LED is turned on for 3 seconds.	Recommended viewing	2~6m	• If this occurs, dim or turn off the light.
‹‹Performing the pairing process	distance	(6.5 to 19.5 ft)	• Switching the input mode while watching a 3D movie may disable the 3D
Turn the TV on and let it power up	Recommended pairing	50 cm or less
completely. Press and hold the Power				function on the TV. As a result, the 3D glasses may not function and the
	distance	(19.5 in)
button on the glasses. The green and the				movie may not be displayed properly.
red LEDs blink alternately for 2 seconds.
✎✎Once the 3D glasses are paired, the remaining battery capacity is			• If the 3D glasses are moved outside of their working distance, the signal
				from the TV will disconnect and the glasses' 3D function will turn off after
displayed on the TV screen. (This feature only applies to Samsung F series
				several seconds.
3D TVs and 3D glasses that have been available since 2013.)
✎✎If you keep trying to pair the glasses and the TV, the battery level will			• The 3D glasses will power off after the 3D function turns off. When this
				happens, the red LED will turn on for 3 seconds.
decrease significantly. However, the battery level will recover to a certain
degree in about a minute.			• Under some circumstances, the 3D glasses may malfunction due to
✎✎The working distance depends on the existence of obstacles (a person,				interference from other devices.
			• Ensure you are within the working distance of the glasses when you view a
metal, walls, etc.) between the glasses and the TV and the strength of the
Bluetooth signal.				3D video.
✎✎Turn off the 3D glasses while they are not in use. If you leave the 3D			• The images may not be viewable in 3D if you move outside of the working
glasses on, the battery lifespan decreases.				distance for 3 seconds.

• If you lie on your side while watching TV with 3D active glasses, the picture may appear dark or may not be visible.

• The 3D glasses may not work properly due to interference from other 3D products or electronic devices that operate on the 2.4GHz frequency such as a microwave oven or Internet AP. If the 3D function malfunctions due to interference, please move all other electronic or wireless communication devices as far away from the glasses and the TV as possible.

English

English - 11

2013-11-20 ￿￿ 1:59:02