Signal Information (digital channels only)

Unlike analogue channels, which can vary in reception quality from ‘snowy’ to clear, digital (HDTV) channels have either perfect reception quality or you will not receive them at all. So, unlike analogue channels, you cannot fine tune a digital channel. You can, however, adjust your antenna to improve the reception of available digital channels.

N If the signal strength meter indicates that the signal is weak, physically adjust your antenna to increase the signal strength. Continue to adjust the antenna until you find the best position with the strongest signal.

Software Upgrade

Samsung may offer upgrades for the TV’s firmware in the future. These upgrades can be performed via the TV when it is connected to the Internet, or by downloading the new firmware from samsung.com to a USB memory device.

NCurrent Version is the software already installed in the TV.

NAlternative Software (Backup) shows the previous version that will be replaced.

NSoftware is represented as ‘Year/Month/Day_Version’. The more recent the date, the newer the software version. Installing the latest version is recommended.

By USB

Insert a USB drive containing the firmware upgrade downloaded from samsung.com into the

TV. Please be careful to not disconnect the power or remove the USB drive while upgrades are being applied. The TV will turn off and turn on automatically after completing the firmware upgrade. Please check the firmware version after the upgrades are complete (the new version will have a higher number than the older version).

When software is upgraded, video and audio settings you have made will return to their default (factory) settings. We recommend you write down your settings so that you can easily reset them after the upgrade.

By Channel

TV Rear Panel

 

 

 

 

USB Drive

 

 

 

 

 

 

 

 

 

 

 

Software Upgrade

Current Version

2008/11/17_000001

 

 

 

 

By USB

By Channel

 

 

Standby Mode Upgrade

: 45 Min

Alternative Software

2008/11/16_000000

 

UMove EEnter RReturn

Upgrades the software using the broadcasting signal.

NIf the function is selected during the software transmission period, this function searches for available software and downloads the software.

NThe time required to download the software is determined by the signal status.

Standby Mode Upgrade

To continue software upgrade with master power on, Select On by pressing the ▲ or ▼ button. 45 minutes after entering standby mode, a manual upgrade is automatically conducted. Since the power of the unit is turned on internally, the screen may be on slightly for the LED product. This phenomenon may continue for more than 1 hour until the software upgrade is completed.

Alternative Software (Backup)

If there is an issue with the new firmware and it is affecting operation, you can change the software to the previous version.

NIf software was changed, existing software is displayed.

N You can change current software to alternative software by ‘Alternative Software’.

HD Connection Guide

This menu presents the connection method that provides the optimal quality for the HD TV. Refer to this information when connecting external devices to the TV.

Contact Samsung

View this information when your TV does not work properly or when you want to upgrade the software. You can view the information regarding the call centre, product and software file download method.

English - 29

Page 31
Image 31
Samsung UE40B6050VWXXE manual Software Upgrade, HD Connection Guide, Contact Samsung