Samsung UE60H7005SQXXE manual Connecting to a Wireless Internet Network with WPS, 111 222

555In the IP Settings screen, set the IP setting to Enter manually, enter the IP Address, Subnet Mask, Gateway, and DNS Server values, and then select OK.

●● Use one of the following methods to enter the numerical values.

Set the numbers using the u and d buttons.

Press KEYPAD button and enter the numbers directly.

IP Settings

IP setting	Enter manually
IP Address	0.0.0.0
Subnet Mask	0.0.0.0
Gateway	0.0.0.0
DNS setting	Enter manually
DNS Server	0.0.0.0
OK	Cancel

666The TV attempts to connect to the network again using the specified settings. A confirmation message appears once a connection is established. Select OK.

"" The network connection speed may differ depending on the DNS server settings.

"" For details on the DNS server settings, contact the Internet service provider (ISP).

Connecting to a Wireless Internet Network with WPS

Network > Network Settings

With wireless routers that support WPS (Wi-Fi Protected Setup) or PBC (Push Button Configuration), it's possible to press a button on the router to connect the TV to the Internet.

""

111

222

This functionality is not available with wireless routers that do not support WPS. Check to see if your wireless router supports WPS.

Setting the Network Type to Wireless automatically displays a list of available wireless networks.

Select WPS(PBC) and then press the WPS or PBC button located on the wireless router within two minutes.

333The TV exchanges the network name (SSID) and security key automatically and then attempts to

connect to the Internet. A confirmation message appears once a connection is established. Select OK.