NSelect a channel for the wireless IP sharer that is not currently being used. If the channel set for the wireless IP sharer is currently being used by another device nearby, this will result in interference and communications may fail.

NIf you apply a security system other than the systems listed blow, it will not work with the TV.

•When applying the security key for the AP (wireless IP sharer), only the following is supported.

1)Authentication Mode : OPEN, SHARED, WPAPSK, WPA2PSK

2)Encryption Type : WEP, TKIP, AES

•When applying the security key for the Ad-hoc mode, only the following is supported.

1)Authentication Mode : SHARED, WPANONE

2)Encryption Type : WEP, TKIP, AES

NIf your AP supports WPS(Wi-Fi Protected Setup), you can connect to the network via PBC (Push Button Configuration) or PIN (Personal Indentification Number). WPS will automatically configure the SSID and WPA key in either mode.

NIf the device isn’t certified, it may not connect to the TV via the ‘Samsung Wireless LAN Adapter’.

¦Setting the Network

❑ Network Type

 

Select Cable or Wireless as the method to connect to the network.

 

 

N The menu is activated only if the ‘Samsung Wireless LAN Adapter’ is connected.

Setup

 

 

■

Cable

 

 

Connect to the network using a cable.

 

■

Wireless

 

 

Connect to the network wirelessly.

 

❑Network Setup■Cable Network Setup(when Network Type is set to Cable)

N Please check if the LAN cable is connected.

●Internet Protocol Setup → Auto / Manual

●Network Test: You can test or confirm the network connection status after setting up the network.

NWhen unable to connect to a wired network

Broadcast

Security

Network▶

General

If your Internet service provider has registered the MAC address of the device used to connect to the Internet for the first time and authenticates the MAC address each time you connect to the Internet, your TV may not be able to connect to the Internet as the MAC address differs from that of the device (PC).

In this case, ask your Internet service provider about the procedures to connect devices other than your PC (such as your TV) to the Internet. If your Internet service provider requires an ID or password to connect to the Internet (network), your TV may not be able to connect to the Internet. In this case, you have to enter your ID or password when connecting to the Internet using an Internet Sharer (Router).

The internet connection may fail due to a firewall problem. In this case, contact your Internet service provider. If you cannot connect to the Internet even if you have followed the procedures of your Internet service provider, please contact Samsung Electronics.

Cable Network Setup-Auto

If you connect the LAN cable and it supports DHCP, the Internet Protocol (IP) Settings are automatically configured.

1.Set Network Type to Cable.2.Select Cable Network Setup.3.Set Internet Protocol Setup to Auto.

N The Internet Protocol is set automatically.

4.Select Network Test to check the network connectivity.

Cable Network Setup

Internet Protocol Setup

: Auto

 

 

▶

Network Test

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

IP Address

:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Subnet Mask

:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Gateway

:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DNS Server

:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

UMove EEnter

 

RReturn

English - 28