INSTALLING THE INDOOR UNIT
Connecting the Assembly Cable
The outdoor unit is powered from the indoor unit via the assembly cable.
If the outdoor unit is more than 5m(16ft. 5in) away from the indoor unit, the cable must first be extended to a maximum of 15m(49ft. 3in).
1Extend the assembly cable if necessary.
2Open the front grille by pulling on the tabs on the lower right and left sides of the indoor unit; if necessary, refer to page 21.
3Remove the screw securing the connector cover, then open the connector cover.
ENGLISH
❊The designs and shape are subject to change according to the model.
Connector cover
4Remove three screws securing the front panel, then detach the front panel from the indoor unit.