Checking Correct Earthing

If the power distribution circuit does not have an earth or the earth does not comply with specifications, an earthing electrode must be installed. The corresponding accessories are not supplied with the air conditioner.

1Select an earthing electrode that complies with the specifications given in the illustration opposite.

. 2 Determine a suitable location for the earthing electrode:

◆In damp hard soil rather than loose sandy or gravel soil that has a higher earthing resistance

◆Away from underground structures or facilities, such as gas pipes, water pipes, telephone lines and underground cables

◆At least 2m(6ft. 7in) away from a lightening conductor earthing electrode and its cable

➢The earthing wire for the telephone line cannot be used to earth the air conditioner.

3Dig a hole of the size indicated in the illustration opposite, drive the earthing electrode into position and cover the top of the electrode with the excavated soil.

1

4 Install a green/yellow insulated earthing wire (Ø1.6 mm/ 16 ˝, section

2 mm2 or greater):

◆ If the earthing wire is too short, connect an extension lead, soldering the connection and wrapping it with insulating tape (do not bury the soldered connection)

◆ Secure the earthing wire in position with staples

➢If the earthing electrode is installed in an area of heavy traffic, its wire must be connected securely.

5Carefully check the installation, by measuring the earthing resistance with an earthing resistance tester. If the resistance is above the required level, drive the earthing electrode deeper into the ground or increase the number of earthing electrodes.

6Connect the earthing wire to the earthing screw on the air conditioner.

INSTALLING THE OUTDOOR UNIT

ENGLISH

Carbon

Steel

 

plastic

core

 

PVC-insulated green/

To

earthing

yellow wire, 2mm2 x 3.5 m

screw

Unit : cm(inch)

50 (19 34 )

3 30 (11 4 )

E-43

Page 42 Page 44
Page 43
Image 43
Samsung UM26B1C2, UM18B1C2, UM27B1C3, AM27B1C13, AM27B1C07, AM26B1C13 installation manual Checking Correct Earthing
Page 42 Page 44

AM26B1C13, AM27B1C07, AM27B1C13, UM27B1C3, UM26B1C2 specifications

The Samsung AM27B1C07, UM26B1C2, AM26B1C13, AM27B1C13, and UM18B1C2 are a series of advanced memory devices that underline Samsung's commitment to providing high-performance solutions in the evolving landscape of electronics and computing. These products are characterized by their cutting-edge technologies, reliability, and efficiency, catering to various applications in consumer electronics and industrial use.

One of the main features of these series is their use of Samsung’s state-of-the-art NAND flash technology. This technology is designed to enhance data storage performance while minimizing power consumption, making these devices ideal for portable and battery-operated applications. The devices utilize 3D NAND architecture to increase storage density while ensuring superior durability and speed.

The AM27B1C07 and AM27B1C13 are particularly noted for their high sequential read and write speeds, making them suitable for tasks that require rapid data access, such as gaming and high-definition video processing. These memory solutions support advanced error correction codes (ECC) which ensure data integrity and reliability over time. They have also been optimized for lower latency, enhancing overall system responsiveness.

The UM26B1C2 and UM18B1C2 variants focus on delivering optimized bandwidth, catering well to the demands of modern applications including mobile devices, tablets, and laptops. With integrated power management features, these memory devices help extend battery life while maintaining high-performance levels during peak usage.

All models in this series are built to withstand demanding environments, boasting an extended temperature range that assures stable operation. This feature makes them highly suitable for industrial applications where conditions can fluctuate significantly.

Additionally, Samsung’s commitment to sustainability is evident in these memory solutions. They are designed with energy-efficient processes that not only enhance performance but also reduce the carbon footprint of their production.

Overall, the Samsung AM27B1C07, UM26B1C2, AM26B1C13, AM27B1C13, and UM18B1C2 integrate advanced technologies and features that address the needs of various markets, including consumer electronics, automotive, and industrial sectors. Their blend of high speed, efficiency, and reliability makes them an attractive choice for manufacturers looking to enhance their product offerings with cutting-edge memory solutions.
Top Page Image Contents