Samsung UN65HU9000 manual Setup or Auto Program Broadcasting Auto Program

The Problem

Try this!

	When the TV is turned on, the remote control receiver flashes 5 times before the
	screen turns on.
	If you are having problems powering on your Samsung television, there are a
Problems Powering On	number of things to check before calling the service department. Confirm that the
	TV's power cord is connected correctly at both ends and that the remote control
	is operating normally. Make sure that the antenna cable or cable TV cable is firmly
	connected. If you have a cable/satellite box confirm that it is plugged in and turned
	on.
Unable to find a	If your TV is not connected to a cable box or satellite box, run Setup (System >
Channel	Setup) or Auto Program (Broadcasting > Auto Program).
	Store displays are all tuned to digital, HD (high definition) channels.
	If you have an analog cable/set top box, upgrade to a digital set top box. Use
	HDMI or Component cables to deliver HD (high definition) picture quality.
The TV image does	Many HD channels are upscaled from SD (Standard Definition) content. Look for a
	channel that is broadcasting true HD content.
not look as good as it
	●● Cable/Satellite Subscribers: Try HD channels from the channel lineup.
did in the store.
	●● Air/Cable Antenna Connection: Try HD channels after running the Auto Program
	function.
	Adjust the cable/satellite box's video output resolution to 1080i or 720p.
	The compression of video content may cause picture distortions, especially in fast
	moving pictures from sports programs and action movies.
The picture is	A weak or bad quality signal can cause picture distortions. This is not an issue
distorted.	with the TV.
	Mobile phones used close to the TV (within 3.2 ft) may cause noise in analog and
	digital channels.
The color is wrong or	If you’re using a Component connection, make sure that the Component cables are
	connected to the correct jacks. Incorrect or loose connections may cause color
missing.
	problems or a blank screen.
The color is poor	Go to the Picture menu and then adjust the Picture Mode, Brightness, Sharpness,
	and Color settings.
or the picture is not
	See if Energy Saving (System > Eco Solution > Energy Saving) has been enabled.
bright enough.
	Try resetting the picture. (Picture > Picture Reset)
There is a dotted line	If the Picture Size has been set to Screen Fit, change the setting to 16:9.
on the edge of the
	Change the cable/satellite box resolution.
screen.
The picture is black	If you are using AV composite input, connect the video cable (yellow) to the TV's
and white.	green component jack.