Antenna (Air/Cable) Connection
There is something wrong
with the TV.
Try this!
| Make sure the coaxial cable is connected securely. | |
The TV is not receiving | Run Auto Program (Broadcasting > Auto Program) to add all available channels | |
all channels. | to the channel list. | |
| Verify that the antenna is positioned correctly. | |
|
| |
There are no captions on | Navigate to Caption (Broadcasting > Caption) and change the Caption Mode | |
setting. | ||
digital channels. | ||
Some channels may not have caption data. | ||
| ||
|
| |
| The compression of video content may cause picture distortions. This is | |
The picture is distorted. | especially true with fast moving pictures such as sports and action movies. | |
| A weak signal can cause picture distortions. This is not a problem with the TV. | |
|
|
PC Connection
There is something wrong
with the TV.
Try this!
The "Mode Not |
|
Supported" message | Set your PC’s output resolution so it matches a resolution supported by the TV. |
appears. |
|
|
|
The video is OK but | If you are using an HDMI connection, check the audio output setting on your PC. |
there is no audio. | If you are using a DVI to HDMI cable, a separate audio cable is required. |
|
|
Networking
There is something wrong
with the TV.
Try this!
The wireless network | Make sure the TV is connected to a wireless IP router. | |
connection failed. | ||
| ||
|
| |
The Software Update | Check the network connection status. | |
over the network has | If the TV is not connected to a network, connect to a network. | |
failed. | The upgrade will not proceed if you already have the latest software version. | |
|
|
