Samsung UW17J11VD5XXEU, UW17J11VD5XXEG, UW17J11VD5XXEC Using the Feature depending on the model

C18A_ENG_europe_17"_film 10/14/03 9:34 AM Page 47

Using the Feature (depending on the model)

Before presetting your VCR unit:

◆Check that the language, date and time are correct (if the clock has not been set, the Date/Time Setting function is activated automatically)

◆Insert the cassette on which the programme is to be recorded (safety tab intact)

Up to six programmes can be preset.

1Press the SHOW VIEW button.

Result: A message is displayed to allow you to enter the SHOWVIEW code.

☛If there is no SHOW VIEW button on your remote control, the SHOWVIEW feature is not available on your model. If all six programmes have been set, the list of preset recordings is displayed to enable you to modify an existing recording or clear one that you no longer require. Refer to page 51 for further details.

2Press the numeric buttons to enter the code opposite the programme that you wish to record in your television magazine.

➢If you wish to correct the SHOWVIEW code that you are entering:

◆Press the œ button until the digit to be corrected is cleared

◆Enter the correct digit

3Press the MENU button.

Result: The Timer Record is selected.

4Press the œ or √ button again.

☛When you finish the inputting SHOWVIEW code, the Timer Record program will be set automatically. At this moment, the current channel is set for the recording. The channel to be recorded should be selected by user.

5Press the † or … button to select Start, and tnen press the œ or √ button. Modify the start time by pressing the † or … button.

➢When entering the date and time, all single digits must be preceded by a zero.

Example: 7:30 am Enter 07:30

6Press the † or … button to select Stop. Modify the stop time in the same way.

➢To set Record Stop time to less than one hour, always select Minute first.

ENG

SHOWVIEW

CODE - - - - - - - - -

0-9 Code Correct End

Timer Record			VCR Menu
				√
Timer Record Review				√
Repeat		: Off
Picture		: Normal
Tape Select		: E180/T120
V.System		: AUTO
Select	Enter			Exit
			VCR Menu
PR.	P 1
Start	22	: 00
Stop	23	: 00
Date	30	/ 04 / 2003
Mode	Once
Decoder	Off
Speed	SP
PDC	Off
Select	Adjust			Exit
			VCR Menu
PR.	P 1
Start	22	: 00
Stop	23	: 00
Date	30	/ 04 / 2003
Mode	Once
Decoder	Off
Speed	SP
PDC	Off
Select	Adjust			Exit
			VCR Menu
PR.	P 1
Start	22	: 00
Stop	23	: 00
Date	30	/ 04 / 2003
Mode	Once
Decoder	Off
Speed	SP
PDC	Off
Select	Adjust			Exit

47