C18A_ENG_europe_17"_film 10/10/03 4:11 PM Page 14
Plug and Play Feature
ENG
Plug & Play
Language
English Español
Deutsch Português
Français Italiano
Nederland Sverige
Adjust |
| Select |
Ant. Input : Check | ||
Exit |
|
|
|
| Channel |
Auto Store |
| |
Country | : Belgie | |
Search | : 435.250MHz | |
Select | Adjust | Exit |
|
| Channel |
Auto Store |
| |
Country | : Belgie | |
Search | : 435.250MHz | |
Select | Adjust | Exit |
P 1 |
| |
67.250 MHz 78 | 3 % |
Exit
Time
Clock -
When the television is initially powered on, several basic customer settings proceed automatically and subsequently. The following settings are available.
1If the television is in Standby mode, press the POWER () button on the remote control.
Result: The Plug & Play is displayed.
2To start the Plug & Play, press the ENTER button. Result: The Language menu is displayed.
3Select the appropriate language by pressing the † or … button. Press the MENU () button to confirm your choice.
Result: The message Antenna input check is displayed.
4Make sure that the antenna is connected to the TV.
Result: After a little while, the Country menu is displayed.
5Select your country by pressing the ▲ or ▼ button. Press the MENU () button to confirm your choice.
Result: The Auto Store menu is displayed.
6To start the channel store, press the ENTER button.
Result: The search will end automatically. Channels are sorted and stored in an order which reflects their position in the frequency range (with lowest first and hialghest last).
➢To stop the search before it has finished or return to normal viewing, select the Exit and press the ENTER button.
7When searching and storing is complete, the Time menu is displayed.
8Press the œ or √ button to move to the hour or minute. Set the hour or minute by pressing the ▲ or ▼ button (refer to “Setting the Current Date and Time” on page 32).
9When the setting has finished all, the message Enjoy viewing your new TV is displayed, and then the channel which has been stored will be activated.
Move | Exit |
ENJOY YOUR WATCHING
14