Brocade Communications Systems 53-1002373-02 manual Supported software features, Rack mount kit

Supported software features 1

The 32-slot router fan control modules include a bi-color LED, which indicates the status of the fans. Table 26 describes the states for this LED.

TABLE 26 Brocade MLX and Brocade NetIron XMR 32-slot router fan control LED

LED	Position	State	Meaning
Fan control LED	Rear of router	Off	The fans are not receiving power.
	on the fan
		Green	The fans are working and responding to commands from the
	assembly
			fan control module.
		Red	The fans are not working and not responding to commands
			the fan control module.

The router ships with fan assemblies fully installed. Fan assemblies are hot-swappable, which means you can remove and replace them without powering down the system.

NIBI-16-FAN-EXH-A high-speed fan assemblies

NIBI-16-FAN-EXH-A high-speed fan assemblies are required for Brocade MLX Series 16-slot routers when you install NI-MLX-10Gx8-M, NI-MLX-10Gx8-D, or NI-MLX-1Gx48-T-A modules. Brocade MLX Series-16 routers ship with high-speed fan assemblies factory installed. Refer to “Installing NIBI-16-FAN-EXH-A fan assemblies” on page 182 for high-speed fan installation instructions.

Rack mount kit

Brocade MLX Series and Brocade NetIron XMR routers can be mounted in a standard 19-inch (EIA310-D) 2-post rack, using the pre-installed mounting brackets. For flush-mounting, simply use the mounting brackets as installed. For mid-mounting, move the pre-installed brackets from the front edges of the device to the holes provided in the sides of the device. For more information, refer to the appropriate installation chapter for your router model.

Supported software features

For a complete list of software features supported on Brocade MLX Series and Brocade NetIron XMR routers, refer to the Brocade MLX Series and Brocade NetIron Family Configuration Guide.

Brocade MLX Series and Brocade NetIron XMR Hardware Installation Guide	61
53-1002373-02