• For additional security, use cable ties to secure cables to the cable management system hardware on the sides of the unit (Refer to Figure 1.8).
• The cable routing slots at the top and bottom of the unit are strong enough to hold many cables, but the more cable cinches and cable ties you use, the more secure your cable management system will be.
• If you bundle the cables correctly, you will be able to move the bundles to the side to access the modules for service, without disturbing the connections. Refer to Figure 204.
• Always route the cables for the outer-most modules out the sides of the unit. Route the cables for the innermost modules through the top or through the bottom cable management hardware on the unit.
Installing a Brocade NetIron XMR 32000 router
4
FIGURE 195 Brocade NetIron XMR 32000 cable routing scheme
:
CAUTION
Be sure not to exceed the minimum recommended bend radius for the cables: 2 in. for
Brocade MLX Series and Brocade NetIron XMR Hardware Installation Guide | 281 |
|
|
