Managing interface modules | 7 |
Specifying an immediate boot from the auxiliary flash slots on the management module
To specify an immediate boot for the interface module installed in slot 1 from the auxiliary flash slot on the management module, enter the lp boot system command at the Privileged EXEC level of the CLI.
Brocade# lp boot system slot1 primary 1
Syntax: lp boot system slot1 slot2 <filename> <slot-number>
•The slot1 and slot2 keywords indicate the auxiliary flash slot on the management module from which to boot the interface module.
•The <filename> parameter specifies the name of the image from which to boot the interface module.
•The
Specifying an immediate boot from management module flash memory
To specify an immediate boot from the primary image on the management module for the interface module installed in slot 1, enter the following command at the Privileged EXEC level of the CLI.
Brocade# lp boot system mp primary 1
Syntax: lp boot system mp primary secondary <slot-number>
•The primary and secondary keywords specify the primary or secondary software image in flash memory on the management module.
•The
Specifying an immediate boot from flash memory on the interface module
To specify an immediate boot from the primary image in flash memory on the interface module installed in slot 1, enter the following command at the Privileged EXEC level of the CLI.
Brocade# lp boot system flash primary 1
Syntax: lp boot system flash [primary secondary] <slot-number>
•The primary and secondary keywords specify the primary or secondary image in the interface module flash memory.
•The
Specifying an immediate boot from a TFTP server
To specify an immediate boot for the interface module installed in slot 1 from a TFTP server, enter the following command at the Privileged EXEC level of the CLI.
Brocade# lp boot system tftp 123.123.123.123 primary 1
Syntax: lp boot system tftp <ip-address> <filename> <slot-number>
•The
Brocade MLX Series and Brocade NetIron XMR Hardware Installation Guide | 341 |
|
|