![](/images/new-backgrounds/1109210/109210769x1.webp)
Replacing fan assemblies | 8 |
FIGURE 237 Replacing the fan assembly in a Brocade MLXe 4-slot router
FIGURE 238 Replacing the fan assembly in a Brocade MLXe 8-slot router
3.Insert the new fan assembly into the fan slot and push the enclosure in until the faceplate is flush with the router. Pushing the enclosure in seats the fan connector with the router connector.
4.Tighten the four captive screws to secure the fan to the router.
5.Access the CLI, and enter the show chassis command to verify that the fans are operating normally.
Replacing the air filters
It is strongly recommended that routers be installed in environments that have minimal dust and airborne contaminants. If routers are installed in environments where dust or other airborne contaminants may be present, air filters should be inspected and replaced as needed. Maintaining clean air filters ensures optimal airflow through the devices.
Brocade MLX Series and Brocade NetIron XMR Hardware Installation Guide | 367 |
|
|