Brocade Communications Systems 53-1002373-02 manual

2 Mounting Brocade MLXe-4, -8, or -16 routers in a 4-post rack or cabinet

8.Install the router in the cabinet or rack. The router slides into the rack on top of the mounting shelf. Secure the router to the rack rails using eight 10-32 screws. Refer to Figure 69 (MLXe-4 slot router shown).

FIGURE 69 Install the router on the mounting shelf

9.Install the transport brackets to the cabinet or rack rails and to the side plates on the router, using six 10-32 screws. Refer to Figure 70.

NOTE

The transport brackets provide extra stability, and must be installed if you plan to ship the device while it is mounted in the cabinet or rack. Before you install the transport brackets, you must first remove any installed fans.

FIGURE 70 Attach transport brackets to router and to cabinet or rack

104	Brocade MLX Series and NetIron XMR Hardware Installation Guide
	53-1002373-02