![](/images/new-backgrounds/1109210/109210705x1.webp)
|
|
|
| Managing the cooling system | 7 |
Fan Speed | Hi: 70 - | 113 |
|
| |
state = 1 | (FAN_STATE_MED) |
| |||
max_ts_shut_off_count = 1 |
| ||||
shut_off_count = 0 | 0 0 | 0 0 0 0 0 0 0 0 0 0 0 0 0 |
| ||
=== Thermal Sensor | Control Block (THERMAL_SENSOR_TEST_RULE_STANDBY_MP) === |
| |||
Fan Speed | Low: | - 60 |
|
| |
Fan Speed | Med: 57 | - 70 | 80 |
| |
Fan Speed | 67 - |
| |||
Fan Speed | Hi: 77 - | 85 |
|
| |
state = 0 | (FAN_STATE_LOW) |
| |||
max_ts_shut_off_count = 1 |
| ||||
shut_off_count = 0 | 0 0 | 0 0 0 0 0 0 0 0 0 0 0 0 0 |
| ||
=== Thermal Sensor | Control Block (THERMAL_SENSOR_TEST_RULE_MP_CPU) === |
| |||
Fan Speed | Low: | - 60 |
|
| |
Fan Speed | Med: 57 | - 70 | 80 |
| |
Fan Speed | 67 - |
| |||
Fan Speed | Hi: 77 - | 95 |
|
| |
state = 1 | (FAN_STATE_MED) |
| |||
max_ts_shut_off_count = 1 |
| ||||
shut_off_count = 0 | 0 0 | 0 0 0 0 0 0 0 0 0 0 0 0 0 |
|
=== Thermal Sensor Control Block (THERMAL_SENSOR_TEST_RULE_STANDBY_MP_CPU) ===
Fan Speed Low:
Fan Speed Med: 57 - 70
Fan Speed
Fan Speed Hi: 77 - 95 state = 0 (FAN_STATE_LOW) max_ts_shut_off_count = 1
shut_off_count = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Syntax: show fan-threshold
The output displays the following information.
TABLE 50 | Temperature threshold information for modules and fan speeds | |
|
|
|
This field... |
| Displays... |
|
| |
Thermal Sensor Control Block | The temperature threshold information for the various modules. The | |
(THERMAL_SENSOR_TEST_RULE_< <module> parameter indicates the following: | ||
module>) |
| • MP – The active management module |
|
| • STANDBY_MP – The standby management module |
• SNM – The switch fabric module
• LP – An interface module
Fan Speed Low or Med or
The current setting of the low and high temperature thresholds for the low, medium,
NOTE: As indicated in Table 49 on page 333, the low fan speed for each module does not have a default low temperature threshold value, nor can you configure this value. The
State = 0 (FAN_STATE_LOW) | For Brocade internal use only. |
|
|
max_ts_shut_off_count | For Brocade internal use only. |
|
|
shut_off_count = 0 0 0 0 0 0 0 0 | For Brocade internal use only. |
|
|
Brocade MLX Series and Brocade NetIron XMR Hardware Installation Guide | 335 |
|
|