Replacing fan assemblies | 8 |
FIGURE 242 Air filter removal and replacement for a Brocade MLX or Brocade NetIron XMR 4-slot router.
1
| 2 |
|
|
| 3 |
| 4 |
1 | Direction of airflow in device | 3 | Filter retainer |
2 | Filter | 4 | Fan trap |
FIGURE 243 Air filter removal and replacement for the 8-slot router.
1
| 2 |
|
|
| 3 |
| 4 |
1 | Direction of airflow in device | 3 | Filter retainer |
2 | Filter | 4 | Fan trap |
3.Pull the old air filter out of the router and discard it.
4.Insert the replacement air filter by sliding it along the metal guides.
The filter is marked with an arrow that indicates how the filter should be installed for proper airflow in the device. Since air is pulled through the router, the arrow must point right towards the fan tray.
5.Push the filter retainer into the router and tighten the two screws.
Brocade MLX Series and Brocade NetIron XMR Hardware Installation Guide | 371 |
|
|
