8 Replacing a power supply
FIGURE 230 Removing and replacing a power supply in a 32-slot device.
2
3
4
PwrPwr
ActiveActive
AC OK
DC OK
1
5
6
7
8
9
1 | Power supply indicators | 6 | Latch handle locked |
2 | AC OK | 7 | Power supply blank cover |
3 | DC OK | 8 | Pull down on plunger to remove |
4 | ALM | 9 | Power supply |
5 | Latch handle open |
|
|
4.Insert the new power supply into the empty power supply slot, using the guides provided on either side of the slot.
CAUTION
Carefully follow the mechanical guides on each side of the power supply slot and make sure the power supply is properly inserted in the guides. Never insert the power supply upside down.
5.After you insert the power supply, push gently on the power supply faceplate until the power supply is fully seated.
6.Pull up on the handle on the power supply faceplate to lock the power supply in place.
358 | Brocade MLX Series and Brocade NetIron XMR Hardware Installation Guide |
|
|
