Brocade Communications Systems 53-1002373-02 manual Router modules

Router modules 1

Power supply requirements for Gen-1 2-port or 4-port 10 Gbps Ethernet interface modules

Table 10 lists the power supply requirements for each type of router when installing Gen-1 2-port or 4-port 10 Gbps Ethernet interface modules.

TABLE 10 Power supply requirements for Gen-1 2-port or 4-port 10 Gbps Ethernet interface modules

Router type	Number of Gen-1	Power supply requirements
	2-port or 4-port Gbps
	Ethernet interface
	modules installed
MLXe-4	three	one 1200W PSU
		for 1+1 redundancy, install two 1200W PSU
	four	two 1200W PSU
		for 2+2 redundancy, install four 1200W PSU
MLX-4 and	four	one 1200W PSU
Brocade NetIron		for 1+1 redundancy, install two 1200W PSU
XMR 4000
MLXe-8	seven	two 1200W PSU
		for 2+2 redundancy, install four 1200W PSU
	eight	three 1200W PSU
		for 3+1 redundancy, install four 1200W PSU
Brocade NetIron	eight	two 1200W PSU
XMR 8000		for 2+2 redundancy, install eight 1200W PSU
All 16-slot routers	sixteen	four 1200W PSU
		for 4+4 redundancy, install eight 1200W PSU
All 32-slot routers	thirty-two	four 2400W PSU
		for 4+4 redundancy, install eight 2400W PSU

Brocade MLX Series and Brocade NetIron XMR Hardware Installation Guide	31
53-1002373-02