Brocade Communications Systems 53-1002373-02 manual Temperature Readings

Installing a Brocade MLX-16 router 3

Slot8 pri=1 module type=NI-MLX-10Gx8-M 8-port 10GbE (M) Module power usage=246W Slot9 pri=1 module type=NI-MLX-10Gx8-M 8-port 10GbE (M) Module power usage=246W Slot10 pri=1 module type=NI-MLX-10Gx4 4-port 10GbE Module power usage=225W Slot11 pri=1 module type=NI-MLX-10Gx4 4-port 10GbE Module power usage=225W Slot12 pri=1 module type=NI-MLX-10Gx8-M 8-port 10GbE (M) Module power usage=246W Slot13 pri=1 module type=NI-MLX-10Gx8-M 8-port 10GbE (M) Module power usage=246W Slot14 pri=1 module type=NI-MLX-10Gx4 4-port 10GbE Module power usage=225W Slot15 pri=1 module type=NI-MLX-10Gx4 4-port 10GbE Module power usage=225W Slot16 pri=1 module type=NI-MLX-10Gx8-M 8-port 10GbE (M) Module power usage=246W

--- FANS ---

Bottom fan tray (fan 1): Status = OK, Speed = HI (100%)

Bottom fan tray (fan 2): Status = OK, Speed = HI (100%)

Bottom fan tray (fan 3): Status = OK, Speed = HI (100%)

Bottom fan tray (fan 4): Status = OK, Speed = HI (100%)

Bottom fan tray (fan 5): Status = OK, Speed = HI (100%)

Bottom fan tray (fan 6): Status = OK, Speed = HI (100%)

Rev A Back Fan A (revision 0x09): Status = OK, Speed = HI (100%)

Rev A Back Fan B (revision 0x09): Status = OK, Speed = HI (100%)

--- TEMPERATURE READINGS ---

Active Mgmt Module: 40.250C 60.875C

Standby Mgmt Module: 34.500C 821384312.545015484C

SNM1: FE1:50.0C FE2:50.0C FE3:50.625C

SNM2: FE1:46.375C FE2:43.875C FE3:41.750C

SNM3: FE1:48.875C FE2:47.375C FE3:48.250C

SNM4: FE1:47.375C FE2:42.375C FE3:39.875C

LP1 Sensor1: 47.625C

LP1 Sensor2: 51.625C

LP1 Sensor3: UNUSED

LP1 Sensor4: 51.375C

LP1 Sensor5: 48.500C

LP1 Sensor6: UNUSED

LP1 Sensor7: 183.0C

.

.

.

Fans are in auto mode (current speed is HI (100%)). Temperature monitoring poll period is 60 seconds.

--- MISC INFO ---

Backplane EEPROM MAC Address: 000c.dbdf.6400

This output shows firmware Revision A (Rev A) for NIBI-16-FAN-EXH-A fan modules. Rev A indicates that the Brocade MLX-16 contains the required rear fan modules to support NI-MLX-10Gx8 and NI-MLX-1Gx48-T-A modules. The RPM value thresholds (LOW/MED/MED-HI/HI) are also displayed for rear fan modules.

NOTE

If the Brocade MLX-16 does not contain NIBI-16-FAN-EXH-A modules, the show chassis command output will not list Rev A for rear fan modules.

Brocade MLX Series and Brocade NetIron XMR Hardware Installation Guide	185
53-1002373-02