Brocade Communications Systems 53-1002373-02 manual Power lug screws

2 Installing a Brocade MLXe-32 router

Follow these steps to connect a DC power source.

1.Use a #1 Phillips screwdriver to remove the screw that secures the safety cover, as shown in Figure 102. Remove the safety cover.

FIGURE 102 Removing the safety cover (2400W power supply and 3000W power supply displayed)

2. Use a #2 Phillips screwdriver to unscrew the power lugs. Refer to Figure 103.

FIGURE 103 Removing the power lugs (2400W power supply and 3000W power supply displayed)

1

2

2

1 Power lug screws 2 Power lug

3.Crimp the correct AWG power supply wire into the power lugs. For 2400W power supplies: #4 AWG power supply wire

For 3000W power supplies: #2 AWG power supply wire Refer to Figure 104.

1

138	Brocade MLX Series and NetIron XMR Hardware Installation Guide
	53-1002373-02