Replacing fan assemblies | 8 |
FIGURE 231 32-slot router fan assemblies
2
1
4
3
6
5
8
7
10
9
1 | Fan module 1 | 6 | Fan module 6 |
2 | Fan module 2 | 7 | Fan module 7 |
3 | Fan module 3 | 8 | Fan module 8 |
4 | Fan module 4 | 9 | Fan module 9 |
5 | Fan module 5 | 10 | Fan module 10 |
4.Insert the new fan assembly into the fan slot and push the assembly in until the faceplate is flush with the router. Pushing the fan assembly in seats the fan connector in the router connector.
5.Secure the fan assembly to the router by replacing and tightening the four screws (on the upper eight fan assemblies) and the two screws (on the lower two fan assemblies).
Brocade MLX Series and Brocade NetIron XMR Hardware Installation Guide | 361 |
|
|
