4 Installation precautions
General precautions
Follow these general precautions when installing a Brocade NetIron XMR router.
DANGER
The procedures in this manual are for qualified service personnel.
DANGER
If the installation requires a different power cord than the one supplied with the router, make sure you use a power cord displaying the mark of the safety agency that defines the regulations for power cords in your country. The mark is your assurance that the power cord can be used safely with the router.
DANGER
All
CAUTION
Do not install the router in an environment where the operating ambient temperature might exceed 40ο C (104ο F).
CAUTION
Make sure the air flow around the front, sides, and back of the router is not restricted.
CAUTION
If you do not install a module in a slot, you must keep the slot blank in place. If you run the router with an uncovered slot, the system may overheat.
CAUTION
Never leave tools inside the router.
Power precautions
236 | Brocade MLX Series and NetIron XMR Hardware Installation Guide |
|
|
