C18A_ENG_europe_17"_film 10/10/03 4:11 PM Page 11
Switching Your Television On and Off
The mains lead is attached to the rear of your television.
☛ | If you have purchased this television in the United |
| Kingdom, refer to page 82 for further instructions on |
| plug wiring. |
1 Plug the mains lead into an appropriate socket.
➢The main voltage is indicated on the rear of the television and the frequency is 50 or 60Hz.
2Press the “ I ” button (On/Off) on the front of the television.
Result: The Standby indicator on the front of the television lights up.
3Press the POWER (
) button on the remote control to switch the television on.
Result: The programme that you were watching last is re- selected automatically.
➢If you have not yet stored any channels, No clear picture appears. Refer to “Storing Channels Automatically” on page 16 or “Storing Channels Manually” on page 17.
4To switch your television off, press again the POWER (
) button on the front of the television.
ENG
Front of the TV
Placing Your Television in Standby Mode
Your television can be placed in Standby mode, in order to reduce the power consumption.
The Standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).
1Press the POWER (
) button on the remote control.
Result: The screen is turned off and the Standby indicator on the front of the television lights up.
2To switch the television back on, simply press again the POWER (
) button on the remote control.
☛Do not leave your television in Standby mode for long periods of time (when you are away on holiday, for example). Turn your television off by pressing the “ l ” button (On/Off) on the front of the television. It is best to unplug the set from the mains and aerial.
11