14 -

English

Tuning Your Television for the DVD-

VCR

You must tune your television for the DVD-VCR
only if you are using the RF cable.
To view pictures from your DVD-VCR when a
Scart cable is used, the television must be set to
the audio/video mode (AV).
1Switch on the television.
2Switch on the DVD-VCR by pressing the
/ISTANDBY/ON on the front of the DVD-
VCR or STANDBY/ONon the remote control.
3Select a programme position on the television
to be reserved for use with your DVD-VCR.
4Insert the video cassette in the DVD-VCR.
Check that the DVD-VCR starts reading the
cassette; if not, press the IIbutton.
5Start a scan on your television or set the tele-
vision to UHF channel 38.
(New Zealand : UHF 36CH)
6Fine tune the television until the pictures and
sound are obtained clearly.
7When the picture and sound are perfectly
clear, store this channel at the desired
programme position on the television.
That programme is now reserved for use with
your DVD-VCR.
SSettings
ettings Your DVD-VCR contains a 24-hour clock and
calendar used to:
• Automatically stop programme recording.
• Preset your DVD-VCR to record a programme
automatically.
You must set the date and time when:
• You purchase the DVD-VCR.
• Do not forget to reset the time when you
change clocks from winter to summer time
and vice versa.
1Press the MENUbutton, then press the OK or
button.
2Press the or button to select Clock,
then press the OKor button.
The Clock Set menu is displayed.
3Press the ¥orbutton to select the hour,
minutes, day, month, and year. The selected
option is highlighted. Press the orbutton
to set them. The day of the week is displayed
automatically. Press the OKbutton.
• You can hold down the orbutton to
scroll more quickly through the values.
• Press the MENU button to exit the menu.

Setting the Date and Time

OK
SETUP
VCR
PROG
FUNC
DVD
Setup
Language : English
Clock
Install
User Set
Auto Power Off : Off
Screen Messages : On
RETURN MENU
MENU
RETURN
OK
Clock Set
SETUP
VCR
PROG
FUNC
DVD
Time Date Year
12 : 00 01 / JAN / 2007 MON
6700_XSA_Eng1(01) 2/14/07 7:54 PM Page 14