Samsung V6700 Recording a Programme with Automatic Stop, Recording from Another VCR or Camcorder

Recording a Programme with Automatic Stop

This function enables you to record up to nine hours (LP) of programmes.Your DVD-VCR stops automatically after the requested length of time.

1 Switch on the television.

2 Insert the cassette on which the programme is to be recorded, with the window visible and the safety tab intact or the opening covered with adhesive tape. The DVD-VCR is switched on automatically.

3 Select the station to be recorded by pressing the PROG( or ) button or select the source (LINE IN 1, LINE IN 2) by pressing the INPUT SEL. button for a satellite tuner or external video source. The station number is displayed and the programme can be seen on the television.

4 Select the recording speed by pressing the SPEED button as many times as required (Refer to page 23).

5 Hold down the REC (●) button for a while to start recording. The record indicator appears on the television screen and DVD-VCR dis- play. An index is recorded on the tape (Refer to page 29).

6 Press the REC (●) button several times to increase the recording time in:

•30-minute intervals up to four hours.

•1-hour intervals up to nine hours.

The length is displayed on the television dis- plays. The selected programme is recorded for the length of time requested. At the end of that time, the DVD-VCR stops recording auto- matically and power off.

LENGTH 2:30

SET LENGTH :

PRESS REC ●

7 If you wish to cancel the recording before the end, press the STANDBY/ON button.

•If the end of the tape is reached while recording, the recording stops and power off.

Recording from Another VCR or Camcorder

You can copy a cassette to your DVD-VCR from another video source, such as another VCR or a Camcorder etc.

•It is an infringement of copyright laws to copy prerecorded cassettes or to re-record them in any form without the permission of the owners of the corresponding copyright.

1 Connect the output jack of your external devices to the LINE IN 1 or LINE IN 2 on the front or rear of the DVD-VCR.

2 Insert a blank cassette in your DVD-VCR.

3 Insert the pre-recorded cassette in the other video source (VCR or Camcorder etc).

4 Press the INPUT SEL. button to select the appropriate input on your DVD-VCR:

• LINE IN 1, LINE IN 2 for the audio/video input.

5 Start playing back the cassette to be copied.

6 Hold down the REC (●) button for a while to start recording on your DVD-VCR.

7 When you have finished recording, press the

■button on both VCR and DVD-VCR.

• If you wish to view the cassette being copied, your DVD-VCR must be connected as usual to the television (Refer to page 9 for further details).

24 - English