English
- 25
Using the Assemble Edit Function
This function allows you to start a new recording
at a specific position on the cassette while main-
taining a very smooth scene change.
1Insert the cassette to be edited in your
DVD-VCR.
2Press the llbutton to start playback.
3When you reach the position from which you
wish to start the new recording,
press the llbutton.
4Press the F.ADV/STEPbutton as often as
necessary to advance frame by frame, until
the exact recording position is located.
5While the DVD-VCR is in still mode, hold
down the REC(●) button for a while to acti-
vate the assemble edit function. The mode is
changed to pause.
6Select the source from which you wish to
record by pressing:
• The PROG or button for television
channels.
• The INPUT SEL. button for the LINE IN 1,
LINE IN 2 input source.
7Press the llbutton to start recording.
If you want to finish the recording, press the
■ button.
Using The Timer Programming
Feature
The Timer Programming feature allows you to
preset the DVD-VCR to record a programme up
to one month before that programme is to be
broadcast. Up to six programmes can be preset.
• Before presetting a recording, check that the
Date and Time are correct.
• You must check that the cassette tape is
loaded.
1Press the MENUbutton, then press the or
button to select PROG.
2Press the OKor button. The timer pro-
gramming menu is displayed.
3Press the OKor button to select PR, then
press the orbutton to select the required
station.
• Press the INPUT SEL.button to select an
input source (LINE IN 1, LINE IN 2) other
then the tuner.
4Press the button to select Day, then press
the or button to select the required day.
MENU
RETURN
OK
SETUP
VCR
PROG
FUNC
DVD
Timer Method
If you want to set the
timer program, press
theOKkey.
::
::
::
::
::
::
PR Day Start Stop Speed
RETURN MENU
OK
01 MO 01
6700_XSA_Eng1(01) 2/14/07 7:54 PM Page 25