4.3 Screen Layout
When On + Mic Mute is selected, an incoming call will automatically
be connected, but your voice will not be heard by the remote caller.
.
.
.
3If you want to refuse all incoming calls, set Do not Disturb to On.
.
.
.
4An incoming call will be indicated by a ringtone. If you want to mute
the ringtone, select Audio, and set Sounds to Off.
4.3 Screen Layout
The image of the remote party will appear when your call is accepted.
The button can be used to change the screen layout of yours and the
remote caller’s as required. Each time you press , the screen layout will
change as shown below: The blue figure represents the remote caller, and the
green figure represents you.
•In DVI or PC mode
–A call is connected
–A call is not connected
•In VC mode
–A call is connected
–A call is not connected
You can change the size and location of the
smaller picture in this screen layout.
.
.
.
1Press to open the Setup screen, and go to Input.