Samsung VC240 manual Power-saving Modes, Max. Power Saving Mode, Standby Mode

2.8Power-saving Modes

As shown in Table 4, there are three types of power supply modes. The moni- tor enters active mode after you have pressed and the monitor has turned on.

Table 4: Power specification

Input power	100–240 V
Active mode	Less than 85 W
Standby mode	Less than 35 W
Max. power-saving mode	Less than 3 W

Max. Power Saving Mode

With this mode active, the monitor can save energy by automatically switch- ing itself to maximum power-saving mode when it is in DVI or PC mode and the PC is turned off and is no longer sending a video signal.

1.. If the monitor is in VC mode, press to switch to DVI or PC mode.

2.. Press to open the Setup screen.

2.8 Power-saving Modes

3.. Set Max. Power Saving to On.

After the PC has turned on, the monitor will automatically turn itself on when it receives a video signal from the PC . However, the monitor will not automatically power on, even if it receives a video signal, if it was powered off by the button.

You cannot receive an incoming call in maximum power-saving mode; the monitor will not automatically power on.

Refer to Windows Help for details about how to configure power saving set- tings for your PC.

Standby Mode

In VC mode, you can set the monitor to automatically switch to standby mode after the remote control has been left idle for a specified time:

1.. If the monitor is in PC or DVI mode, press to switch to VC mode.

◀ 15 ▶