❚❚ Bottom of the Dial Controller
1Remove the cover at the bottom of Dial Controller and then turn on the power.
• Charge your Dial Controller before turning the power on.
OPEN
OPEN
OPEN
OPEN
CONNECT
RESET
DC 5V
IN
RESET CONNECT
1
2
|
| RESETButton |
|
|
|
1 | DC 5V IN Jack | Connect the Micro USB cable to charge the Dial Controller. |
|
|
|
2 | ButtonCONNECT | Try connecting to a Speaker. |
2Check the LED status (blinking in pink). If the battery level is low, charge the Dial Controller by connecting the Micro USB cable. (For more information about the LED display, see page 7.)
It takes approximately 3 hours to fully charge the battery. Fully charged battery can last up to 90 days.
Battery life is subject to use conditions and environment.
The RESET button is for troubleshooting.
ENG - 8
