On for a second and off for a second
Blinking stops and stays on
Three times per second
Twice per second
Once per second
Blinking time
Error - Reset the Battery Pack and the DC Cable
90% ~ 100%
75% ~ 90%
50% ~ 75%
Less than 50%
Charging rate

ENGLISH

Preparation

Using the Lithium Ion Battery Pack

✤Use SB-LSM80 or SB-LSM160 Battery Pack only.

✤The Battery Pack may be charged a little at the time of purchase.

Charging the Lithium Ion Battery Pack

1. Turn the [Power] switch to [OFF].

2. Attach the Battery Pack to the Camcorder.

3. Connect the AC Power adapter (AA-E9 TYPE) to a wall socket.

4. Connect the DC cable to the DC jack on the Camcorder.

■ The charging indicator will start to blink, showing that the Battery is charging.

5.Press and hold the DISPLAY button while charging and the charging status will be displayed on the LCD screen for 7 seconds.

■The battery charge status is given as reference and is an estimation. It may differ depending on the Battery capacity and temperature.

6.When the Battery is fully charged, disconnect the Battery Pack and the AC Power Adapter from the Camcorder.

Even with the Power switched Off, the Battery Pack will still discharge.

Battery Info

BBaatttteerryy cchhaarrggeedd

0%

50%

100%

Charging, Recording Times based on Model and Battery Type.

✤The continuous recording times given in the table to the right are approximations.

Actual recording time depends on usage.

✤The continuous recording times in the operating instructions are measured using a fully charged Battery Pack at 77 °F (25 °C).

✤Even when the Power switched Off, the Battery Pack will still discharge if it is left attached to the device.

Time

Charging time

Recording time

Battery

 

 

SB-LSM80

Approx.

Approx.

1hr 20min

1hr 20min

 

 

 

 

SB-LSM160

Approx.

Approx.

(Option)

3hr

2hr 40min

 

 

 

16