ENGLISH
Playback
VOICE + Function
✤ The Voice+ function works only in <Player> mode. ➥ page 19 | TV |
✤When you want to play back or record a
device, you can transfer the voice sound incoming from the internal | Camcorder |
|
| microphone of your camcorder, instead of the audio signals on a pre- |
| Audio/Video | |
| recorded tape. |
| Cable | |
|
|
| ||
1. | Connect the provided Audio/Video Cable to the AV Jack of the Camcorder. | VCR |
| |
|
| |||
2. | Connect the other end of the cable to the VCR/DVD Recorder/TV by |
| Signal flow | |
| matching the colours of the terminals. | Audio/Video Cable | ||
3. | Set the [Power] switch to [PLAYER]. | |||
| ||||
4. | Set the [Mode] switch to [TAPE]. | |||
5. | Insert the tape you wish to play back in this camcorder. | D372WH(i) |
| |
6. Press the [Start/Stop] button on a point where you want during the playback. |
|
| ||
| ■ Voice+ icon ( ) is displayed on the screen and <VOICE+> will flicker on |
|
| |
| the screen for a while. | œ | œ | |
| ■ Sound incoming from the internal microphone will be transferred to the | |||
| connected AV device, instead of the | |||
7. | To cancel the function, press the [Start/Stop] button again. | 5 | √ SP 0:01:53:10 |
60min
[ Notes ]
■VOICE+ is available only when the Audio/Video cable is connected. If other cable (DV cable or USB cable
■If you perform [■ (STOP)], [√❙❙ (PLAY/STILL)], [œœ (REW)] or [√√ (FF)] button when you operate Voice+ function, Voice+ function will be deactivated.
■ | During the VOICE+ process, the functions of [MENU] button or [PHOTO] button do not | 6 |
|
| work. | √ SP 0:01:53:10 | |
|
| 60min | |
■ | The VOICE+ function does not affect the original sound on the recorded tape. |
| |
|
|
■Sound is transferred from the internal microphone on this camcorder to the connected AV
device, when using the Voice+ function. So take care that this microphone is not blocked. | Voice+ | √ |
■ Adjust the sound volume on the connected external device. ( TV, etc.) |
| |
|
| |
■ Howling may occur near the speaker of an external device, please keep the camcorder at a |
|
|
distance from the external device. |
|
|
■ Before connecting, make sure that the volume on the external device is turned down: |
|
|
forgetting this may cause howling from the external device's speakers. |
| 67 |