ENGLISH
Initial Setting : System Menu Setting
Viewing the Demonstration (Demonstration)
✤ The Demonstration function may only be used in the <Camera> mode without a tape | 1 | |
inserted in the Camcorder. ➥page 19 | ||
|
✤Before you begin: Make sure that there is no tape inserted in the Camcorder. ➥page 32
✤Demonstration automatically shows you the major functions that are included with your Camcorder so that you may use them more easily.
✤The Demonstration operates repeatedly until the Demonstration mode is switched Off.
1. Set the [Power] switch to [CAMERA].
2.Set the [Mode] switch to [TAPE].
3.Press the [MENU] button.
■The menu list will appear.
4.Press the [▲ / ▼] button to select <System>, then press the [OK] button.
5.Press the [▲ / ▼] button to select <Demonstration>, then press the [OK] button.
6.Press the [▲ / ▼] button to select <On>, then press the [OK] button.
7.Press the [MENU] button.
■The Demonstration will begin.
8.To quit the Demonstration, press the [MENU] button.
[ Notes ]
■The Demonstration function is automatically activated when the Camcorder is left idle for more than 10 minutes after switching to the <Camera> mode (if no tape is inserted in the Camcorder).
■If you press other buttons (FADE, C.NITE, EASY.Q) during the Demonstration mode, the demonstration stops temporarily and resumes 10 minutes later if you do not operate any other functions.
4
6
7
Camera Mode |
|
√System |
|
Clock Set |
|
Remote | √On |
Beep Sound | √On |
Shutter Sound | √On |
Language | √English |
Demonstration | √On |
Move OK Select MENU Exit
Camera Mode
Back
Clock Set
Remote
Beep Sound
Shutter Sound
Language Off
Demonstration 
On
Move OK Select MENU Exit
SAMSUNG Camcorder is...
34x Optical Zoom
28
Demonstration