ENGLISH
Basic Recording
Self Record using the Remote Control (Setting the Self Timer)
✤The SELF TIMER function works only in <Camera> mode. ➥page 19
✤When you use the SELF TIMER function on the remote control, the recording begins automatically in 10 seconds.
1.Set the [Power] switch to [CAMERA].
2.Set the [Mode] switch to [TAPE].
3.Press the [SELF TIMER] button until the appropriate indicator is displayed.
4.Press the [Start/Stop] button to start the timer.
■SELF TIMER starts counting down from 10 with a beep sound.
■If you want to cancel the SELF TIMER function before recording, press the [SELF TIMER] button.
5.Press the [Start/Stop] button again when you wish to stop recording.
[ Notes ]
■Do not obstruct the remote control sensor by putting obstacles between the remote control and Camcorder.
■The remote control range is 4 ~5m (13 ~17 ft).
■The effective remote control angle is up to 30 degrees left /right from the centre line.
■Using a tripod (not supplied) is recommended for delayed recording.
1
3
œ
45
38