ENGLISH

Playback

Connecting to a TV which has no Audio/Video Input Jacks

✤You can connect your Camcorder to a TV through a VCR.

1.Connect the Camcorder to your VCR with the Audio/Video Cable.

■The yellow jack: Video

■The white jack: Audio(L) - Mono

■The red jack: Audio(R)

2.Connect a TV to the VCR.

3.Set the [Power] switch to [PLAYER].

VCR

Camcorder

Audio/Video

Cable

TV

Signal flow

Audio/Video

Cable

Antenna

4.Set the [Mode] switch to [TAPE]. (VP-D375W(i)/D975W(i) only)

5.Turn on both the TV and VCR.

■Set the input selector on the VCR to Line.

■Select the channel reserved for your VCR on the TV set.

VP-D371(i)/D371W(i)/ VP-D375W(i)/D975W(i) D372WH(i)

6. Play the tape.

Playback

1.Connect a power source and set the [Power] switch to [PLAYER].

2.Set the [Mode] switch to [TAPE]. (VP-D375W(i)/D975W(i) only)

3.Insert the tape you wish to play back.

4.Using the [œœ (REW)]/[√√(FF)] buttons, find the first position you wish to play back.

5.Press the [√❙❙ (PLAY/STILL)] button.

■The images you recorded will appear on the TV after a few seconds.

■If a tape reaches its end while being played back, the tape will rewind automatically.

[ Notes ]

œ

œ

■The playback mode (SP/LP) is selected automatically.

■If only a mono audio input is available on the TV set, use the audio cable with the white jack (Audio L).

66