troubleshooting
Symptom | Explanation/Solution |
An afterimage remains on the LCD | • This occurs if you disconnect the AC power adaptor or remove the battery pack |
screen. | before turning the power off |
|
|
The image on the LCD screen | • Ambient light is too bright. Adjust the brightness and angle of LCD. |
looks dark. | • Use LCD enhancer function. |
|
|
Discs |
|
Symptom | Explanation/Solution | |
| • The internal temperature of your camcorder is unusually high. Turn off your | |
| camcorder and leave it for a while in a cool and dry place. | |
The disc cannot be removed. | • Your camcorder is damp and moist inside (condensation). Turn off your camcorder | |
and leave it for about 1 hour in a cool and dry place. page 108 | ||
| ||
| • Finalising is interrupted by turning off your camcorder. Turn on your camcorder and | |
| remove the disc only when the finalisation is completed. pages | |
|
| |
Disc is not recognised and the | • The disc is damaged. Replace with a new disc. | |
disc cover opens. | ||
| ||
|
| |
Recording |
|
Symptom | Explanation/Solution | |
| • Press the MODE button to set Movie ( ). | |
Pressing the Recording Start/ | • There is not enough free space to record on the | |
or memory card. | ||
Stop button does not start | ||
• Check if memory card is not inserted or | ||
recording. | ||
• Your camcorder is damp and moist inside (condensation). Turn off your camcorder | ||
| ||
| and leave it for about 1 hour in a cool, dry place. page 108 | |
|
| |
The actual recording time is less | • The estimated recording time is calculated by some references. | |
• When you record an object that moves fast, the actual recording time may be | ||
than the estimated recording time. | ||
| shortened. |
110_ English