using the menu items

Calibration

The items on the touch panel may not work correctly. If this happens, follow the procedure below. It is recommended you connect your DVD camcorder to the wall outlet using the supplied AC power adaptor during the operation.

1.Slide the POWER switch to turn on the power.

2.Disconnect all cables with the exception of the AC power adaptor from DVD camcorder, then eject the memory card and DVD disc from the DVD camcorder.

2

Calibration

 

 

 

 

2/3

 

 

1

 

 

Touch the X

3

3.Touch the Menu () tab “Settings () tab “Calibration.”

4.Touch “X” displayed on the screen with a round tip of pen (or something similar) which does not damage the LCD screen.

•When touching “X” displayed on the screen, the position of the “X” is changed.

5.Repeat the step 4 three times.

•When touching the last position of “X”, the calibration setting is finished and the menu screen is displayed.

•If you did not touch the right spot, try the calibration again.

•To cancel calibration, touch Return () tab.

• Do not use a sharp-pointed object for calibration. Doing so may damage the LCD screen.

74_ English