preparation
CONNECTING A POWER SOURCE
•There are two types of power source that can be connected to your DVD camcorder.
•Do not use provided power supply units with other equipment.
-The battery pack: used for outdoor recording.
-The AC power adaptor: used for indoor recording.
To charge the battery pack
Be sure to charge the battery pack before you start using your DVD camcorder.
Attaching the battery pack to the DVD camcorder
1. Open up the LCD screen 90 degrees with your finger.
2. Fit the battery pack to the battery attachment platform and push the battery pack as shown in the figure until a click is heard.
Removing the battery pack from the DVD camcorder
1.Open up the LCD screen 90 degrees with your finger.
2.Slide the BATT. (battery release) switch in the direction as shown in the figure
and pull out the battery pack.
Insert the battery pack in the accurate direction as shown in the figure. When
WARNING the battery pack is wrongly inserted, it may cause malfunction of the DVD camcorder and battery pack.
It is recommended you purchase one or more additional battery packs to allow continuous use of your DVD camcorder.
Additional battery packs are available at your local Samsung dealer.
If the DVD camcorder will not be in use for a while, remove the battery from the DVD camcorder.
Use only
Otherwise, there is a danger of overheating, fire or explosion.
Samsung is not responsible for problems occurring due to using unapproved batteries.
16_ English