| GETTING READY TO SEW | ||
| Connecting the Power Supply | ||
| The Memory Craft 9700 is equipped with an auto | ||
| voltage system, which automatically adjusts the | ||
1 | equipment to any local power supply voltage between | ||
100 and 240V, 50/60 Hz. | |||
| |||
3 | First, turn off the Power Switch. Then insert the Foot | ||
| Control Plug and Machine Plug into the Machine | ||
| Socket. Next, insert the Power Supply Plug into the | ||
| Wall Outlet and turn on the Power Switch. | ||
| 5 |
| |
2 | 1 | Power Switch | |
2 | Machine Plug | ||
| 3 | Machine Socket | |
| 4 | Power Supply Plug | |
| 5 | Wall Outlet | |
| 6 | Foot Control Plug | |
NOTES:
4Make sure to use the Power Supply Cord that came with the machine.
If you turn off the power switch, wait for 5 seconds before turning it on again.
The Foot Control cannot be used in the Embroidery Mode.
1
3
2
For Your Safety:
While in operation, always keep your eyes on the sewing area, and do not touch any moving parts such as the thread
-when leaving the machine unattended.
-when attaching or removing parts.
-when cleaning the machine.
Do not place anything on the Foot Control.
6
3
5
4
Operating Instructions:
The symbol “O” of a switch indicates the “off” position of a switch.
For appliances with a polarized plug (one blade wider than the other):
To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If it does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not modify the plug in any way.
6
