2
1
Threading for bobbin winding
1Hold the upper thread with both hands and place it down into the Slit.
3
4
2
6
5
1
2Guide the thread around the Thread Guide following the dashed line as shown in the diagram.
3Thread through the hole in the Bobbin from the inside to the outside. Put the Bobbin on the Bobbin Winder Spindle.
4Push it to the right.
5Hold the free end of the thread in your hand and depress the foot control.
Stop the machine after the bobbin has made several turns, and cut the thread close to the hole in the bobbin.
6Depress the Foot Control again. When the Bobbin is fully wound, it will stop automatically.
Release the Foot Control and return the Bobbin Winder Spindle to its original position by moving it to the left, and cut the thread with the Bobbin Thread Cutter as shown.
1Bobbin Winder Stopper
2Bobbin Thread Cutter
NOTES:
The machine will not sew until the spindle has been returned to the left.
You can use either the Foot Control or the Start/Stop Button to wind the Bobbin.
For safety purposes, the machine will stop automatically 1.5 minutes after starting bobbin winding.
13
