Button Sewing |
|
| 3 | Auto |
| |
|
|
|
|
| T |
|
13 | 14 | 15 | 16 | 17 | 18 |
|
Sensor | Auto |
|
|
|
|
|
19 | 20 | 21 | 22 | 23 | 24 |
|
|
|
|
|
|
| SET |
|
|
|
|
| Adjust | A Z |
Button sewing
Select the pattern 20 and the feed dog will automatically drop.
Place a button on the fabric and lower the needle by turning the handwheel with your hand, so that the needle enters through the left hole in the button.
Align the direction of the button and lower the Button
Sewing Foot T to hold the button in place.
Press the Needle Up/Down Button to bring the needle up to the highest position. Adjust the stitch width, so that the zigzag width matches the span of the holes in the button.
Press the Start/Stop Button to sew and the machine will stop automatically.
Trim the Needle Thread at the Beginning.
1 Needle Thread at the Beginning
Raise the foot and remove the fabric. Cut both threads leaving a 2 cm (4”) tail. Pull the bobbin thread to bring
1the needle thread down to the wrong side of the fabric then knot the threads.
2 Bobbin Thread
3 Needle Thread
NOTE:
3The Feed Dog will be raised automatically after selecting other stitch patterns.
2
50
