Janome 9700 manual Knit Stitch, Double Overedge Stitch, Overlock Stitch

Models: 9700

1 110
Download 110 pages 39.39 Kb
Page 37
Image 37

1

07

1

09

1

37

1

38

2

2

2

2

3

Variety of overcasting stitches

Multiple Zigzag Stitch (Tricot Stitch)

This stitch is used to finish a raw edge of synthetics and other stretch fabrics that tend to pucker.

Sew along the fabric edge leaving an adequate seam allowance. After sewing, trim off the seam allowance closer to the stitches.

1Pattern 07

2Zigzag foot A

Knit Stitch

This stitch is recommended for sewing such fabrics as synthetic knits and stretch velour as it provides the greatest amount of elasticity and strength.

Sew along the fabric edge leaving an adequate seam allowance. After sewing, trim off the seam allowance closer to the stitches.

1Pattern 09

2Zigzag foot A

Double Overedge Stitch

This stitch is excellent for fabrics that tend to fray extensively such as linens and gabardines.

Two rows of zigzag stitches are simultaneously sewn over the edge to insure that the fabric will not ravel.

1Pattern 37

2Overedge Foot C

Overlock Stitch

This stitch finishes the edges of fabric similar to a commercial overlocking machine for a professional look.

1Pattern 38

2Overcasting Foot M

CAUTION:

When you use Overedge Foot C or Overcasting Foot M, you must set the zigzag width at 5.0 or wider to prevent the needle from hitting the Foot Wires.

3 Foot Wires

35

Page 37
Image 37
Janome 9700 manual Knit Stitch, Double Overedge Stitch, Overlock Stitch