1
1
Winding the Bobbin
Removing the bobbin
1 Slide the Hook Cover Plate Release Button to the right, and remove the Hook Cover Plate.
1 Hook Cover Plate Release Button
2 Hook Cover Plate
2
3
2
2Lift out the Bobbin from the Bobbin Holder. 3 Bobbin
Setting the Spool of Thread
Lift up the Spool Pin. Place the spool of thread on the Spool Pin with the thread coming off the spool as shown. Attach the Large Spool Holder, and press it firmly against the spool of thread.
NOTE:
Use the Small Spool Holder to hold narrow or small spools of thread.
6
5
4
7
6
Additional Spool Pin
Use the Additional Spool Pin when you need to wind the bobbin without unthreading the machine while working on a sewing project.
Insert the Additional Spool Pin into the Spool Stand and then into the Hole beside the horizontal spool pin. Place the Felt on the spool pin and place a spool of thread on it as shown.
4Additional Spool Pin
5Felt
6Hole
7Spool Stand
12
